TOTALSAT FORUMS

Go Back   TOTALSAT FORUMS > TOTALSAT FORUMS > SATELLITE RECEIVERS

SATELLITE RECEIVERS Satellite Receiver Discussions and help, Firmware updates

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 12th April 2011, 01:45 PM
Super Moderator
 
Join Date: Nov 1999
Posts: 831
Send a message via Skype™ to TotalSatTeam
Default ICECRYPT S3000 Firmware - No Sound on BIS HD channels Fix

BIS TV - No Audio on HD Channels fix for ICECRYPT 3000 ONLY

If you are using BIS TV Card with an ICECRYPT 3000 Box and you have no Sound on France2 HD and Arte HD, download this firmware and update your box.

Compatible ONLY with ICECRYPT S3000HDCCI


Step by step instructions, how to update/upgrade:

STEP A:

Make sure you have a USB stick (recommeded) to use with this procedure Or an external USB hard drive.


STEP B:

  1. Download the new Firmware zip file attached to this post.
  2. Unzip the file on your PC, then copy the unzipped file to the USB stick or External USB drive
  3. Insert the USB Stick at the front USB port of your ICECRYPT box.


STEP C:
  1. Press MENU button on Remote control
  2. Go DOWN to TOOLS, press OK
  3. Go to Upgrade by USB press OK
  4. Make sure Upgrade mode selected is: Allcode+bootloader
  5. Make sure upgrade files is showing: ICECRYPT_S3000HD_02
  6. Go down to Start and press OK
  7. Wait until progress bar shows 100%, the box will then reboot

STEP D:

This firmware update will reset the box, so a retune will be required
To retune your box for the BIS channels, follow these steps;

  1. Press MENU (default start screen) go down to Installation (2nd down)
  2. Go right, then down to Satellite List, press OK
  3. Go down to 3rd Satellite HOTBIRD, press OK
  4. Press EXIT one time to go back to previous menu (Installation)
  5. Go down to TP list, press OK
  6. On TP List, go down to frequency 11681, Press OK then OK again to confirm
  7. On Search end message, press OK
  8. Repeat underlined step 6 with frequency; 12149 - 12245 - 12692
To tune the non BIS, other Free to air channels on Hotbird;
  1. Press EXIT one time to leave the TP List Menu
  2. Back to Installation menu, go down to; Single Satellite Search
  3. Go down to FTA only and change it with left volume button to YES
  4. Go down to Search and press OK


DO NOT USE this procedure with any other box, Only use with the box listed above.

Reply to this thread for support (only about the box listed in this topic)

TS Team
Attached Files
File Type: zip icecrypt_s3000hd_02.zip (1.58 MB, 29 views)
__________________
--

The title is as important as the post/thread.
Always think of a good descriptive title for your post.

If your question has been answered or you no longer require assistance, please REPLY to let us know.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!Share on FacebookSpurl this Post!Reddit! Wong this Post!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to Reset or retune Visiosat TNT SAT Box after firmware update TotalSatTeam FRENCH TV FORUM 7 25th June 2011 04:42 PM
Lost sound on French channels SBonnet FRENCH TV FORUM 2 14th October 2010 03:17 PM
ELECTRON PS - 1900 CRCI - New firmware update {}AdamO SATELLITE RECEIVERS 1 27th October 2009 09:52 AM
TIPS: Firmware update: ELECTRON CR1900 NZamali SATELLITE RECEIVERS 0 26th May 2006 06:13 PM


All times are GMT. The time now is 02:15 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Forums Operated and Owned by TotalSat Limited