TIPS: How to add ART Sport 5 & 6 on ELECTRON CR1900

[TotalSatTeam]

You can tune ART Sport 5 & 6 manually by following the steps below:

1/ Press MENU
2/ Go to the first box: Search Channels
3/ Select: Manual Search
4/ Enter pin: 0000
5/ Make sure Satellite name is Hotbird (selected)
6/ Type the frequency for ART Sport: 12015
7/ Type Symbol Rate: 27500
8/ Select the Polarization: HOR
9/ Go to Search Start and hit OK


When you finish, the easiest way to trace and find the new channels in you listing is:

1/ Press GROUP button on your remote
2/ Select HOTBIRD satellite name on the left screen split
3/ Press the RED button on your remote that says UHF, this will rearrange the channels list to Alphabetical order
4/ Exit this screen and press OK to navigate to the new ART Sport channels

Totalsat Team

[CJTThomson]

Will this work on a normal sky/sky+ box. When you say press menu, do u mean the top left button, or what do u do with a sky/sky+ to get hotbird

[CJTThomson]

Will I need a freesat box, or a viacess cam to get the channel.

[TotalSatTeam]

This steps do not apply to SKY boxes, you cannot use an ART card on SKY or Freesat boxes, you will need a universal digital satellite receiver with a viaccess slot that is not freesat, tntsat, sky... box
no provider branded boxes

[CJTThomson]

So could you say put a viaccess cam for example into a sky digibox and encrypt that way. Or would I need my dish to be pointing a certain way to get the signal

[CJTThomson]

So could you say put a viaccess cam for example VIACCESS 3 MPEG4 CAM (alone or would you need an art sports card as well) into a sky digibox and encrypt that way. Or would I need my dish to be pointing a certain way to get the signal. somewhere I read art sport requires a mpeg 2.5 cam. Also with the universal satellite receiver can it be run off a normal dish previously used for a sky digibox or would the dish need to be repositioned.

[TotalSatTeam]

<div class="quote"><div class="quoting">CJT Thomson: </div>So could you say put a viaccess cam for example VIACCESS 3 MPEG4 CAM (alone or would you need an art sports card as well) into a sky digibox and encrypt that way. Or would I need my dish to be pointing a certain way to get the signal. somewhere I read art sport requires a mpeg 2.5 cam. Also with the universal satellite receiver can it be run off a normal dish previously used for a sky digibox or would the dish need to be repositioned.</div>

VIACCESS Cam is only used to allow a card like ART Sport to be compatible with a CI enabled receiver
VIACCESS Cam and ART cards are not compatible with any SKY box
VIACCESS 3 is mpeg4 also compatible 2.5mpeg

[CJTThomson]

To receiver ART SPORT can you use a normal sky positioned dish to receive. How much would it cost all in to receive art sport including the fit?

[CJTThomson]

To receiver ART SPORT can you use a normal sky positioned dish to receive. How much would it cost all in to receive art sport including the fit?

[CJTThomson]

To receiver ART SPORT can you use a normal sky positioned dish to receive. How much would it cost all in to receive art sport including the fit?